The main categories are:
Solid wood flooring, engineered wood flooring, laminate flooring, laminate flooring, bamboo flooring.

(A) Solid Wood Flooring

Solid wood flooring is made of wood flooring, mostly tongue and groove flooring, installation easier. More than half of the market is the result of the floor coating (paint) of the finished floor, generally called "lacquer plate." Lacquer plate in the factory processing, paint, drying, higher quality sound paint are generally not easy to achieve a level of quality. Lacquer plate surface after installation no longer almost planing, sanding, painting.

Divided by wood texture wood flooring hardwood flooring and cork cotton board.

1, wood flooring: hardwood floors, hard texture, delicate texture, good wear resistance, elastic net, beautiful. Common wood used in hardwood flooring are ash, birch, walnut, locust tree, crabapple, beech, etc., high quality wood flooring wood with cherry, longan wood, camphor and so on.

2, cork flooring: mainly pine and fir (calcarea, hemlock, etc.), cedar production. Cork floors look warm and flexible. However, poor wear resistance. If drying is not enough, more deformable, dry.

(Two) Parquet

Solid wood flooring is made of solid wood as raw material, there are the following three:

1, three-layer parquet. Using three different wood adhesive made of lead. Surface with a hard wood, such as beech, birch, oak, cherry, ash, etc., the middle layer and the underlying use of soft wood, such as pine as the middle of the core with solid wood to board the flexibility and relatively lower cost.

2, multi-layer parquet. Multi-layer plywood as the substrate, the surface mosaic hardwood sheet by urea-formaldehyde resin laminated.

3, new wood flooring. Surface with a hard wood, such as beech, birch, oak, cherry. Ash, etc., the middle layer and the underlying use of MDF or HDF. Effectiveness and durability of the plate with the three-wood to be almost the same.

(Three) Laminate Flooring

Laminate flooring material composed of three layers, the middle layer of high-density fiberboard, strong impact, not easily deformed; bottom for balancing layer, from the moisture effect; surface is printed decorative layer - BU cover melamine wear layer, anti-wear strength is much higher than wood, good flame resistance, and corrosion.

Moisture, decay. Surface can be printed various grain, nice. Paving convenient, saving wood. But more flexible than solid wood flooring poor.

(Four) bamboo flooring

Bamboo flooring is made of treated bamboo flooring, rich natural materials both natural beauty, but also the advantages of durable wear and decay, earthquake. Bamboo flooring cool, moisture resistant, easy to use, especially to reduce the amount of wood used, protect the environment.

Wood flooring purchase, installation factors to be considered when

1, according to the economic strength to buy

2, prosecutors product packaging, manufacturers, trademarks, and quality checks to ensure commitments.

3, buy solid wood flooring, the sales contract to fill the floor of the formal name, but can not be known, beware of some merchants shoddy deceive. For example, to improve the floor level and prices to "sub-Jing wood materials," posing "red sandalwood material" to deceive consumers.

4, the enterprise makes up a square on a flat surface floor check:

1) the same thickness, the processing precision error of less than 0.5 mm to achieve

2) tight joints, cracks less than 0.2 mm

3) spliced ​​into the diagonal of the square error of less than 1 mm

4) tongue and groove strip veneer gap is less than 1 mm

5) layout is smooth and clear graphics, paint surface uniform color

5. Flooring, consumers should be timely acceptance floor the quantity, quality, size, color, material, etc. are consistent with an optional requirement.

6. In principle to buy someone let someone laying on the floor, do not lay themselves, lest the quality problem after mutual buck-passing, allowing you to suffer unnecessary losses.

Laminate flooring selection Precautions

1. Thickness: floor thickness should be 8 mm. Thickness of only 6 mm floor are mostly temporary exhibitions and other activities using the floor, the price was low, life expectancy is less than 3 mm thick flooring.

2. Wear rpm: an important indicator of the strength of the floor, into the initial number of revolutions (1P). The average number of revolutions (AT) ultimate revolutions (ET), selection should select the same floor indicators compare the number of revolutions.

3. Water resistance: not desirable to use the same plate was immersed in water for 24 hours, check whether the surface from the skin, swelling.

4. Should check the floor of the mouth, Yung processing quality, as well as the back plate corrosion proof coating material is full and so on.

Wood floor maintenance

1. Keep the floor dry, clean and does not allow dripping mop mop the floor, or alkaline, soapy water to clean the floor, so as not to damage the paint surface gloss.

2. Try to avoid sun exposure, so long the paint surface ultraviolet irradiation premature aging and cracking.

3. The local board should be promptly removed if accidentally contaminated oil, used cloth dipped in warm water detergent scrub lightly dampened if drugs or pigments, stains do not penetrate the wood must be removed before the surface.

4. Preferably every three months to play a wax (except for laminate flooring) before waxing to clean the floor surface stains. Frequent waxing can keep the floor finish to extend the life of the floor.

5. Avoid sharp objects scratching the floor surface to avoid dragging heavy furniture.

6. Recommends placing kicking at the door rub pad, to prevent dust particles into and damage the floor. (Ease Flooring Tips)